View IMX8_1254650.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IMX8
Transistors
General purpose (dual transistors)
IMX8
Features 1) Two 2SC3906K chips in an SMT package. 2) High breakdown voltage. External dimensions (Unit : mm)
Package, marking, and packaging specifications
Part No. Package Marking Code Basic ordering unit (pieces) IMX8 SMT6 X8 T108 3000
ROHM : SMT6 EIAJ : SC-74
(4)
1.6 2.8
0.15
(3)
0.3Min.
0~0.1
Each lead has same dimensions
Equivalent circuit
(4) (5) (6)
Tr2
Tr1
(3)
(2)
(1)
Absolute maximum ratings (Ta=25C)
Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC Pc Tj Tstg Limits 120 120 5 50 300(TOTAL) 150 -55 to +150 Unit V V V mA mW C
C
200mW per element must not be exceeded.
Electrical characteristics (Ta=25C)
Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current DC current transfer ratio Transition frequency Collector-emitter saturation voltage Symbol BVCBO BVCEO BVEBO ICBO IEBO hFE fT VCE(sat) Min. 120 120 5 - - 180 - - Typ. - - - - - - 140 - Max. - - - 0.5 0.5 820 - 0.5 Unit V V V A A - MHz V IC=50A IC=1mA IE=50A VCB=100V VEB=4V VCE=6V, IC=2mA VCE=12V, IE= -2mA, f=100MHz IC/IB=10mA/1mA Conditions
Transition frequency of the device
Rev.A
0.8
1.1
0.95 0.95 1.9 2.9
(6)
0.3
(5)
(2)
(1)
1/2
IMX8
Transistors
Electrical characteristics
10
COLLECTOR CURRENT : IC (mA)
25.0 22.5
COLLECTOR CURRENT : IC (mA)
50 20 10 5 2 1 0.5 0.2 0.1 0
0.2 0.4
Ta=25C VCE=6V
DC CURRENT GAIN : hFE
Ta=25C
500
5V 3V
8
20.0 17.5
6
15.0 12.5
200
VCE=1V
4
10.0 7.5
100
2
5.0 2.5
50
0
IB=0A 4
8
12
Ta=25C 16 20
0.6 0.8 1.0 1.2 1.4 1.6
0.2
0.5
1
2
5
10
20
50
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
BASE TO EMITTER VOLTAGE : VBE (V)
COLLECTOR CURRENT : IC (mA)
Fig.1 Ground emitter output characteristics
Fig.2 Ground emitter propagation characteristics
Fig.3 DC current gain vs. collector current
COLLECTOR SATURATION VOLTAGE : VCE(sat)(V)
COLLECTOR SATURATION VOLTAGE : VCE(sat)(V)
Ta=25C
0.5
IC/IB=10
TRANSITION FREQUENCY : fT (MHz)
0.5
VCE=6V Ta=25C
500
0.2 0.1
0.2
Ta=100C
0.1
200 100
IC/IB=50
25C -40C
0.05
20 10
0.05
50 -0.5 -1 -2 -5 -10 -20 -50
0.02 1
2
5
10
20
50
0.02 1
2
5
10
20
50
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IE (mA)
Fig.4 Collector-emitter saturation voltage vs. collector current ( )
Fig.5 Collector-emitter saturation voltage vs. collector current ( )
Fig.6 Gain bandwidth product vs. emitter current
COLLECTOR OUTPUT CAPACITANCE : Cob(pF)
20 10
Ta=25C f=1MHz IE=0A
EMITTER INPUT CAPACITANCE : Cib(pF)
20 10
Ta=25C f=1MHz IC=0A
5
5
2 1
2 1
-0.5
1
2
5
10
20
-0.5
1
2
5
10
20
COLLECTOR TO BASE VOLTAGE : VCB (V)
EMITTER TO BASE VOLTAGE : VEB (V)
Fig.7 Collector output capacitance vs. collector-base voltage
Fig.8 Emitter input capacitance vs. emitter-base voltage
Rev.A
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1

▲Up To Search▲

Price & Availability of IMX8

	To Download IMX8 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .